Laser welding machine manufacturers: the use of laser welding machine
laser welding machineThe workpiece absorbs the laser and quickly melts or even vaporizes, and the molten metal forms a small hole under the action of steam pressure. The laser beam can directly illuminate the bottom of the hole, allowing the hole to continue to extend until the vapor pressure in the hole and the surface of the liquid metal until the tension and gravity reach equilibrium. This welding method has a large penetration depth and a large aspect ratio. When the small hole moves along the welding direction with the laser beam,laser welding machineThe molten metal in front of the small hole flows around the small hole to the back and forms a weld after solidification.
One. Preparation before starting
1. Checklaser welding machineWhether the power supply and water circulation are normal;
2. Check whether the gas connection of the equipment in the machine is normal;
3. Check whether the surface of the machine is free of dust, spots, oil stains, etc.
II. Boot
1. Turn on the power, and then turn on the main power switch;
2. Turn on the water cooler, laser generator, etc. in turn;
3. Open the argon valve and adjust the gas flow;
4. Enter the parameters of the current job to be executed.
5. Welding operations;
Three. Shutdown
1. Exit the program and turn off the laser generator;
2. Turn off the dust collector, water cooler and other equipment in turn;
3. Close the valve of argon cylinder;
4. Turn off the main power switch.
Tag:
Recommended

