Which parameters will affect the welding quality of various laser welding machine equipment
Impactlaser welding machineThe parameters of equipment welding quality include: laser pulse energy, laser beam spot diameter, laser pulse frequency, laser pulse width, laser pulse waveform, relative light absorption rate of welding materials, welding speed, shielding gas, etc.

Laser spot focus diameter: This is a very important parameter that reflects the design performance of the laser. The unit is (mm), which determines the laser power density and processing range. If the optical design of the laser is quite advanced, the laser energy will be concentrated and focused accurately, the laser spot diameter can be controlled in the range of 0.2mm-2mm, and the focus diameter of the laser is controlled at 0.2mm is strictly used for laser generator testing.
Frequency of laser pulses: This is the ability to reflect how many pulses the laser can produce in a second. The unit is (Hz). The first thing to note is that,laser welding machineThe welding metal is the energy of the laser. Under the condition of constant laser power, the higher the frequency, the smaller the energy output of each laser. Therefore, we need to ensure that the energy of the laser is sufficient to melt the metal. The output frequency of the laser may be determined in consideration of the processing speed. In the case of laser repair of grinding tools, 15Hz has been able to meet the needs of welding, too high frequency will inevitably lead to too low laser pulse energy, resulting inlaser welding machineWelding failed.
Laser pulse energy: refers to the maximum output energy of a single laser pulse, the unit is J (joule). This is the main parameter of the laser, which determines the maximum energy that the laser can produce. According to the purpose of mold maintenance, the laser energy below 70J can already meet the needs of any occasion. Whether it is futile energy or unusable at all, it has brought about the continuous increase in the volume of the laser power radiator and reducedlaser welding machinePower supply efficiency.
Tag:
Recommended

