Workflow of fiber laser cutting machine
fiber laser cutting machineIt is an indispensable equipment for modern plate processing industry. In recent years, with the improvement of industrial upgrading and processing requirements, laser intelligent equipment group has successfully developed the fourth generation fiber laser cutting machine, which not only improves the production efficiency, but also improves the operation optimization. First look at the fiber laser cutting machine!
Fiber laser cutting machine workflow:
1. The cutting material is transparent. Fix the plate on the cutting machine to ensure the stability of the material installation, avoid shaking during cutting, and the cutting accuracy cannot meet the requirements.
2. Operating table, input the cutting pattern of the product, the thickness of the cutting material and other parameters, adjust the cutting head to the focus position, and adjust the nozzle by reflection type.
3. Start the stable chiller and set the water temperature and pressure of the chiller.
4. Start the laser, and then turn on the machine.
However, in the actual operation process, it takes a lot of time, and the fiber laser cutting machine will inevitably fail or have problems. The following is a detailed explanation.
1. No response after power on. Power-off fuse: Replace the fuse. Correct power input: Check whether the power input is correct. Damage: Replace the main power switch.
2. No laser output or weak laser.
3. Whether there is a deviation in the optical path: carefully adjust the optical path. Change the focal length of the device: Readjust the focal length.
Or aging: replace the laser. Laser power supply: check whether the laser power supply circuit is normal, whether the laser power supply is damaged, and replace the laser power supply.
The size error and action error of the signal line processing, whether the signal line is normal: replace the signal line, install an unstable power supply or have a voltage regulator to interfere or eliminate the interference signal.
How to safely use fiber laser cutting machine:
1. Follow the safety standards of the cutting machine. Operate the laser according to strict laser operating procedures.
2. Actual operators should understand the structure and characteristics of machinery and equipment, and master the professional knowledge of computer operating system through training.
3. Wear myopia glasses when operating around the fiber laser beam.
Before confirming whether the data is suitable for fiber laser, there is no need for production processing to prevent the formation of steam and smoke.
5. In the process of practical operation, personnel cannot leave or hand over to others. If it is necessary to leave, the actual operator should shut down the equipment.
Tag:
Previous
Recommended

